未提供项目说明
ixconfig的Python项目详细描述
ixconfig
快速而简单的ifconfig和{
安装
pip install ixconfig
使用
^{pr2}$注释
这是我不久前从另一个项目中分解出来的代码。最后，我认为应该在ifcfg中介绍这个功能，但它们目前不处理{
因此，在此之前，这个包涵盖了ifconfig和iwconfig的非常基本的解析。在
输出示例
ifc=ixconfig.Ifc()iwc=ixconfig.Iwc()print(ifc)print(iwc)
($ifconfig){"docker0":{"broadcast":"172.17.255.255","ip":"172.17.0.1","ipv6":"fe80::42:f2ff:fe23:bb38","mac":"02:42:f2:23:bb:38","mtu":1500,"name":"docker0","netmask":"255.255.0.0","rx_dropped":0,"rx_errors":0,"rx_overruns":0,"rx_packets":21326,"tx_carrier":0,"tx_collisions":0,"tx_dropped":0,"tx_errors":0,"tx_overruns":0,"tx_packets":30842},..."wlan0":{"broadcast":"192.168.1.255","ip":"192.168.1.237","ipv6":"fe80::2998:5b3c:8ffb:a03d","mac":"dc:a6:32:5d:df:ce","mtu":1500,"name":"wlan0","netmask":"255.255.255.0","rx_dropped":0,"rx_errors":0,"rx_overruns":0,"rx_packets":1960938,"tx_carrier":0,"tx_collisions":0,"tx_dropped":0,"tx_errors":0,"tx_overruns":0,"tx_packets":2790429}}($iwconfig){"wlan0":{"access_point":"A0:8E:78:59:45:D2","bitrate":72.2,"bitrate_unit":"Mb/s","freq":2.462,"freq_unit":"GHz","mode":"Managed","name":"wlan0","power_mgmt":"on","quality":50.0,"quality_ratio":0.7142857142857143,"ssid":"MySpectrumWiFicc-2G","strength":-60.0,"strength_unit":"dBm"}}
- 项目
标签：
欢迎加入QQ群-->： 979659372
