Hcitool lescan不会实时打印到fi

Question

更新：我使用操作系统解决了我的解决方案。系统：

sensortag=0
while sensortag != "B4:99:4C:64:33:E0":
    #call the command and write to scan.txt file and then fill the process.
    #loop to find if the MAC address given is available
    os.system("hcitool lescan> scan.txt & pkill --signal SIGINT hcitool")
    scan = open("scan.txt","r")
    readscan = scan.read()
    if "B4:99:4C:64:33:E0" in readscan:
        print "SensorTag found."
        sensortag = "B4:99:4C:64:33:E0"

我有两个程序，基本上是相同的，但是有两个不同的命令，在一个Raspberry PI上，运行Raspbian。

我要做的是将这两个命令输出写入一个文件，以便以后可以处理它们。

我不明白为什么第一个程序不起作用，而第二个程序会起作用。

第一个程序有一个“sudo timeout 5 hcitool lescan”命令，该命令不起作用。

import os
import subprocess

#r+ because the file is already there, w without the file
myfile = open("scan.txt", "r+")

#Reset Bluetooth interface, hci0
os.system("sudo hciconfig hci0 down")
os.system("sudo hciconfig hci0 up")

#Scan for bluetooth devices
dev = subprocess.Popen(["sudo timeout 5 hcitool lescan"], stdout=subprocess.PIPE, shell=True)
(device, err) = dev.communicate()

#Print bluetooth devices
print device

#Write the hcitool lescan output to a file
myfile.write(device)

#Close the file
myfile.close()

下面是我拥有的第二个程序，该程序可以对“sudo hciconfig进行精细打印：

import os
import subprocess

#r+ because the file is already there, w without the file
myfile = open("test.txt", "r+")

#Reset Bluetooth interface, hci0
os.system("sudo hciconfig hci0 down")
os.system("sudo hciconfig hci0 up")

#Make sure device is up
interface = subprocess.Popen(["sudo hciconfig"], stdout=subprocess.PIPE, shell=True)
(int, err) = interface.communicate()

#Print hciconfig to make sure it's up
print int

#Write the hciconfig output to a file
myfile.write(int)

#Close the file
myfile.close()

Answer 1

我使用os.system解决了我的解决方案，并立即停止扫描：

sensortag=0
while sensortag != "B4:99:4C:64:33:E0":
    #call the command and write to scan.txt file and then fill the process.
    #loop to find if the MAC address given is available
    os.system("hcitool lescan> scan.txt & pkill --signal SIGINT hcitool")
    scan = open("scan.txt","r")
    readscan = scan.read()
    if "B4:99:4C:64:33:E0" in readscan:
        print "SensorTag found."
        sensortag = "B4:99:4C:64:33:E0"