Rasperry Pi步进电机

Question

我是新的编码和需要使用python为我的高级顶点项目。我想这个代码，让我的步进电机上升和下降，所以我想输入两个值，将允许这一点。此外，我想添加代码，将允许代码继续运行，并将运行时，我只需启动机器

import RPi.GPIO as GPIO
import time 

out1 = 13
out2 = 11
out3 = 15
out4 = 12

i=0
positive=0
negative=0
y=0



GPIO.setmode(GPIO.BOARD)
GPIO.setup(out1,GPIO.OUT)
GPIO.setup(out2,GPIO.OUT)
GPIO.setup(out3,GPIO.OUT)
GPIO.setup(out4,GPIO.OUT)

print "First calibrate by giving some +ve and -ve values....."


try:
   while(1):
      GPIO.output(out1,GPIO.LOW)
      GPIO.output(out2,GPIO.LOW)
      GPIO.output(out3,GPIO.LOW)
      GPIO.output(out4,GPIO.LOW)
      x = input()
      if x>0 and x<=400:
          for y in range(x,0,-1):
              if negative==1:
                  if i==7:
                      i=0
                  else:
                      i=i+1
                  y=y+2
                  negative=0
              positive=1
              #print((x+1)-y)
              if i==0:
                  GPIO.output(out1,GPIO.HIGH)
                  GPIO.output(out2,GPIO.LOW)
                  GPIO.output(out3,GPIO.LOW)
                  GPIO.output(out4,GPIO.LOW)
                  time.sleep(0.03)
                  #time.sleep(1)
              elif i==1:
                  GPIO.output(out1,GPIO.HIGH)
                  GPIO.output(out2,GPIO.HIGH)
                  GPIO.output(out3,GPIO.LOW)
                  GPIO.output(out4,GPIO.LOW)
                  time.sleep(0.03)
                  #time.sleep(1)
              elif i==2:  
                  GPIO.output(out1,GPIO.LOW)
                  GPIO.output(out2,GPIO.HIGH)
                  GPIO.output(out3,GPIO.LOW)
                  GPIO.output(out4,GPIO.LOW)
                  time.sleep(0.03)
                  #time.sleep(1)
              elif i==3:    
                  GPIO.output(out1,GPIO.LOW)
                  GPIO.output(out2,GPIO.HIGH)
                  GPIO.output(out3,GPIO.HIGH)
                  GPIO.output(out4,GPIO.LOW)
                  time.sleep(0.03)
                  #time.sleep(1)
              elif i==4:  
                  GPIO.output(out1,GPIO.LOW)
                  GPIO.output(out2,GPIO.LOW)
                  GPIO.output(out3,GPIO.HIGH)
                  GPIO.output(out4,GPIO.LOW)
                  time.sleep(0.03)
                  #time.sleep(1)
              elif i==5:
                  GPIO.output(out1,GPIO.LOW)
                  GPIO.output(out2,GPIO.LOW)
                  GPIO.output(out3,GPIO.HIGH)
                  GPIO.output(out4,GPIO.HIGH)
                  time.sleep(0.03)
                  #time.sleep(1)
              elif i==6:    
                  GPIO.output(out1,GPIO.LOW)
                  GPIO.output(out2,GPIO.LOW)
                  GPIO.output(out3,GPIO.LOW)
                  GPIO.output(out4,GPIO.HIGH)
                  time.sleep(0.03)
                  #time.sleep(1)
              elif i==7:    
                  GPIO.output(out1,GPIO.HIGH)
                  GPIO.output(out2,GPIO.LOW)
                  GPIO.output(out3,GPIO.LOW)
                  GPIO.output(out4,GPIO.HIGH)
                  time.sleep(0.03)
                  #time.sleep(1)
              if i==7:
                  i=0
                  continue
              i=i+1


      elif x<0 and x>=-400:
          x=x*-1
          for y in range(x,0,-1):
              if positive==1:
                  if i==0:
                      i=7
                  else:
                      i=i-1
                  y=y+3
                  positive=0
              negative=1
              #print((x+1)-y) 
              if i==0:
                  GPIO.output(out1,GPIO.HIGH)
                  GPIO.output(out2,GPIO.LOW)
                  GPIO.output(out3,GPIO.LOW)
                  GPIO.output(out4,GPIO.LOW)
                  time.sleep(0.03)
                  #time.sleep(1)
              elif i==1:
                  GPIO.output(out1,GPIO.HIGH)
                  GPIO.output(out2,GPIO.HIGH)
                  GPIO.output(out3,GPIO.LOW)
                  GPIO.output(out4,GPIO.LOW)
                  time.sleep(0.03)
                  #time.sleep(1)
              elif i==2:  
                  GPIO.output(out1,GPIO.LOW)
                  GPIO.output(out2,GPIO.HIGH)
                  GPIO.output(out3,GPIO.LOW)
                  GPIO.output(out4,GPIO.LOW)
                  time.sleep(0.03)
                  #time.sleep(1)
              elif i==3:    
                  GPIO.output(out1,GPIO.LOW)
                  GPIO.output(out2,GPIO.HIGH)
                  GPIO.output(out3,GPIO.HIGH)
                  GPIO.output(out4,GPIO.LOW)
                  time.sleep(0.03)
                  #time.sleep(1)
              elif i==4:  
                  GPIO.output(out1,GPIO.LOW)
                  GPIO.output(out2,GPIO.LOW)
                  GPIO.output(out3,GPIO.HIGH)
                  GPIO.output(out4,GPIO.LOW)
                  time.sleep(0.03)
                  #time.sleep(1)
              elif i==5:
                  GPIO.output(out1,GPIO.LOW)
                  GPIO.output(out2,GPIO.LOW)
                  GPIO.output(out3,GPIO.HIGH)
                  GPIO.output(out4,GPIO.HIGH)
                  time.sleep(0.03)
                  #time.sleep(1)
              elif i==6:    
                  GPIO.output(out1,GPIO.LOW)
                  GPIO.output(out2,GPIO.LOW)
                  GPIO.output(out3,GPIO.LOW)
                  GPIO.output(out4,GPIO.HIGH)
                  time.sleep(0.03)
                  #time.sleep(1)
              elif i==7:    
                  GPIO.output(out1,GPIO.HIGH)
                  GPIO.output(out2,GPIO.LOW)
                  GPIO.output(out3,GPIO.LOW)
                  GPIO.output(out4,GPIO.HIGH)
                  time.sleep(0.03)
                  #time.sleep(1)
              if i==0:
                  i=7
                  continue
              i=i-1 


except KeyboardInterrupt:
    GPIO.cleanup()'

我能够输入我想要的值和步进电机将旋转该值